濟南卷簾門如何消音復位，火簾控制按鈕上方的復位按鈕和消音器按鈕是什么？

How to silence and reset Jinan rolling shutter door? What are the reset button and silencer button above the fire curtain control button?

當發生火災時，火簾會放下，并發出響亮的警報聲，但這種聲音須通過按下消音器按鈕人為關閉。要將此卷閘門升起，以利于順利通行，且須先按下復位按鈕，然后小心翼翼地操作升起簾門。

In case of fire, the fire curtain will be lowered and a loud alarm sound will be issued, but this sound must be manually closed by pressing the silencer button. To raise the shutter to facilitate smooth passage, first press the reset button, and then carefully operate the raised shutter.

防火門火災報警燈一直亮著，如何復位？

The fire alarm light of the fire door is always on. How to reset it?

答：在中控室復位試試，然后如果不相信就直接把電控箱斷開再通試試，如果都不行，請檢查有沒有誤報，信號干擾，都沒有問題，再換電控箱吧Fipf。

Answer: Try resetting in the central control room, and then if you don't believe it, directly disconnect the electric control box and try again. If it doesn't work, please check whether there are false alarms, signal interference, and no problem. Then replace the electric control box Fipf.

處理防火門怎么辦？

How to deal with fire doors?

答：上按鈕，用于控制快門向上運動；下按鈕，用于控制快門向下運動；停止按鈕，用于控制快門在當前狀態下的停止；復位按鈕，用于控制快門回到默認位置。開關鎖，用于控制是否可以使用釋放按鈕的功能。

Answer: The up button is used to control the upward movement of the shutter; The down button is used to control the downward movement of the shutter; Stop button, used to control the stop of the shutter in the current state; The reset button is used to control the shutter to return to the default position. The switch lock is used to control whether the release button function can be used.

火災報警器一直報警為誤報，可按靜音鍵不復位。沒有復位...

The fire alarm keeps alarming as false alarm. Press the mute key without resetting. No reset

答：火災報警控制器報火警的操作流程：

Answer: The operation process of fire alarm controller:

1、先靜音。

1. Mute first.

2、查看圖形顯示裝置的火災位置。

2. View the fire location of the graphic display device.

3、派人用通訊工具確認現場是否發生火災報警，如發生誤報：1、現場檢查并處理誤報原因，并用專用工具恢復火災報警按鈕，并按下消防控制主機上的復位按鈕。更多相關內容就來我們網站http://www.kmmhwl.com進行咨詢！

3. Send personnel to use communication tools to confirm whether there is a fire alarm on the site. If there is a false alarm: 1. Check and handle the cause of the false alarm on the site, use special tools to restore the fire alarm button, and press the reset button on the fire control host. Come to our website for more relevant content http://www.kmmhwl.com Consult!