卷簾門機箱進水的處理方法

　　The treatment method for water ingress in the rolling shutter door chassis眾所周知，高速卷簾門一般都安裝在單位、企業、廠房等場所的大門口，需長時間曝露在室外，經受著風吹日曬雨淋的威脅，這樣很容易出現機箱進水的情況。高速卷簾門機箱進水該如何處理?

　　As is well known, high-speed rolling shutter doors are generally installed at the entrances of units, enterprises, factories, and other places, and need to be exposed to the outside for a long time, enduring the threat of wind, sun, rain, and rain, which can easily lead to water ingress into the chassis. How to deal with water ingress in the high-speed rolling shutter door chassis?

　　高速卷簾門機箱出現進水、受潮、電路板短路等問題，大都出現在我國南方地區，這是因為南方地區常年下寸，雨水充足，空氣十分潮濕，一年中甚會出現8個月的雨水。而南方地區又是我國的工業發達地區，高速卷簾門到處都是，故而很多高速卷簾門都很容易出現機箱進水問題。

　　The high-speed rolling shutter door chassis has problems such as water ingress, moisture, and circuit board short circuits, which mostly occur in the southern regions of China. This is because the southern regions have abundant rainfall all year round, and the air is very humid. There may even be 8 months of rainfall in a year. And the southern region is also a developed industrial area in China, where high-speed rolling shutter doors are everywhere, so many high-speed rolling shutter doors are prone to water ingress problems in the chassis.

　　當高速卷簾門出現機箱進水問題時，該如何進行處理呢?發現這一問題時，反應就是要立即切斷電源，然后打開高速卷簾門的控制箱，擦干電路板及馬達內的積水，晾干里面的水后，找到漏水的地方，用中性玻璃膠封住漏洞，確保一切正常后，再打開電動門電源，檢查高速卷簾門工作是否正常、電機及控制器有無短路等問題，確認一切正常后，就表示機箱進水故障已經排除了!

　　How to deal with the problem of water ingress into the high-speed rolling shutter door chassis? When this problem is discovered, the first reaction is to immediately cut off the power supply, then open the control box of the high-speed rolling shutter door, wipe away the accumulated water in the circuit board and motor, dry the water inside, find the leaking area, seal the leak with neutral glass glue, ensure everything is normal, and then turn on the power supply of the electric door to check whether the high-speed rolling shutter door is working properly, whether there is a short circuit in the motor and controller, and confirm that everything is normal, It means that the water ingress fault in the chassis has been eliminated!

　　本文由濟南卷簾門提供技術支持，更多的詳細精彩內容請點擊我們的網站http://www.kmmhwl.com，我們將會全心全意為您提供滿意的服務。

　　This article is supported by Jinan roller shutter doors. For more detailed and exciting content, please click on our website http://www.kmmhwl.com We will wholeheartedly provide you with satisfactory service.