濟南門店卷簾門冬季易上凍？洗車店專屬解決方案大揭秘

　　Is the rolling shutter door of Jinan store prone to freezing in winter? Exclusive solutions for car wash shops revealed

　　冬季來臨，濟南不少開自助洗車店或人工洗車店的店主都面臨一個頭疼問題：卷簾門容易上凍，常常升到一半就卡住，既影響生意運營，還可能損壞門體部件。尤其濟南冬季氣溫雖不及東北極端，但晝夜溫差大，洗車店內部水汽充足，這種環境下卷簾門上凍問題更為突出。今天就為大家科普卷簾門上凍的核心原因，以及經過多個生產廠家驗證的實用解決辦法，幫濟南店主們冬季安心營業。

　　As winter approaches, many owners of self-service or manual car wash shops in Jinan are facing a headache: roller shutter doors are prone to freezing and often get stuck halfway up, which not only affects business operations but may also damage door components. Especially in Jinan, although the winter temperature is not as extreme as in Northeast China, there is a large temperature difference between day and night, and there is sufficient water vapor inside car wash shops. In this environment, the problem of freezing on rolling shutter doors is more prominent. Today, we will explain to you the core reasons for the freezing of rolling shutter doors, as well as practical solutions verified by multiple manufacturers, to help Jinan shop owners operate with peace of mind in winter.

　　要解決上凍問題，得搞懂它的產生原理。洗車店的特殊場景是關鍵誘因--門店內部在洗車過程中會產生大量水汽，而冬季濟南室外氣溫較低，卷簾門內外就形成了明顯的溫差。當溫暖潮濕的空氣接觸到冰冷的卷簾門體、軌道時，水汽會迅速凝結成水珠，這些水珠附著在門體縫隙、軌道凹槽等部位，夜間氣溫進一步下降時，就會瞬間結冰。結冰后，門體與軌道之間的摩擦力增大，啟動時就容易出現卡頓，嚴重時甚會導致電機過載損壞，給店主帶來不必要的維修成本。

　　To solve the problem of freezing, the first step is to understand its generation principle. The special scene of a car wash shop is a key factor - a large amount of water vapor is generated during the car washing process inside the store, and in winter, the outdoor temperature in Jinan is relatively low, resulting in a significant temperature difference between the inside and outside of the rolling shutter door. When warm and humid air comes into contact with cold rolling shutter doors and tracks, water vapor quickly condenses into water droplets, which attach to the gaps of the door body, track grooves, and other parts. When the temperature further drops at night, it will instantly freeze. After freezing, the friction between the door and the track increases, making it easy to cause jamming during startup. In severe cases, it can even lead to motor overload and damage, causing unnecessary maintenance costs for the shop owner.

　　經過眾多卷簾門生產廠家的實踐驗證，針對濟南洗車店場景，實用的解決辦法是為卷簾門下方增加配重。這一方法的核心邏輯的是通過配重的重力作用，讓卷簾門下降時與地面嚴絲合縫，徹底填補門體與地面之間的縫隙?？p隙被封堵后，外部的冷空氣無法進入門店內部，內部溫暖潮濕的空氣也不會外泄，從而減少了水汽在門體和軌道上凝結的機會，從根源上避免了結冰現象的發生。

　　After practical verification by numerous manufacturers of rolling shutter doors, the most practical solution for the Jinan car wash scene is to add a counterweight below the rolling shutter door. The core logic of this method is to use the gravitational force of the counterweight to ensure that the rolling shutter door fits perfectly with the ground when it descends, completely filling the gap between the door body and the ground. After the gap is sealed, the cold air from the outside cannot enter the interior of the store, and the warm and humid air inside will not leak out, thereby reducing the chance of water vapor condensation on the door and track, and avoiding the occurrence of icing from the root.

　　這種增加配重的解決方案，不僅效果直接，還具備安裝簡便、成本較低的優勢，完全適配人工洗車店和自助洗車店的使用需求。無論是已經安裝好的舊門，還是新采購的卷簾門，都可以通過后期加裝配重的方式進行改造，無需更換整套門體，大大降低了店主的整改成本。而且配重后的卷簾門，除了防上凍，還能提升門店的密封性，減少室內熱量流失，在冬季也能為店主節省一定的取暖費用，可謂一舉兩得。

　　This solution of increasing weight not only has a direct effect, but also has the advantages of easy installation and low cost, fully adapting to the needs of manual and self-service car wash shops. Whether it is an old door that has already been installed or a newly purchased rolling shutter door, it can be modified by adding counterweights in the later stage, without the need to replace the entire door body, greatly reducing the cost of rectification for shop owners. Moreover, the weighted rolling shutter door can not only prevent freezing, but also improve the sealing of the store, reduce indoor heat loss, and save the store owner some heating costs in winter, which can be said to kill two birds with one stone.

　　除了核心的增加配重方法，還有幾個輔助小技巧能進一步提升防上凍效果?？梢远ㄆ谇謇砭砗熼T軌道內的積水、雜物，避免殘留的水分結冰影響運行；在軌道內涂抹少量專用防凍潤滑油，既能減少門體運行時的摩擦力，也能起到一定的防結冰作用；門店關門后，可適當延長室內排風設備的運行時間，及時排出內部多余水汽，降低室內濕度，減少凝結風險。

　　In addition to the core method of increasing weight, there are several auxiliary tips that can further enhance the anti freezing effect. Regularly clean the accumulated water and debris inside the roller shutter door track to avoid residual moisture freezing and affecting operation; Applying a small amount of specialized antifreeze lubricating oil inside the track can not only reduce the friction during the operation of the door body, but also have a certain anti icing effect; After the store closes, the operation time of indoor exhaust equipment can be appropriately extended to timely discharge excess water vapor inside, reduce indoor humidity, and minimize condensation risk.

　　廠家建議

　　Manufacturer's professional advice

　　作為深耕卷簾門領域的從業者，提醒濟南的店主們：在選擇和改造卷簾門時，要根據門店的實際尺寸、門體重量選擇合適的配重塊，避免配重不足無法密封，或配重過重增加電機負荷；加裝配重時需確保安裝牢固，防止使用過程中脫落；如果卷簾門已經出現結冰卡頓，切勿強行啟動，應先通過溫水解凍、清理冰塊后再操作，避免損壞門體或電機。建議選擇正規廠家提供的配重配件和改造服務，確保改造后的卷簾門運行穩定。

　　As a practitioner deeply involved in the field of rolling shutter doors, I would like to remind shop owners in Jinan that when selecting and renovating rolling shutter doors, they should choose suitable counterweights based on the actual size and weight of the store, to avoid insufficient counterweights that cannot be sealed, or excessive counterweights that increase motor load; When installing counterweights, it is necessary to ensure that they are firmly installed to prevent them from falling off during use; If the rolling shutter door has frozen and stuck, do not forcefully start it. Instead, thaw it with warm water and clean the ice before operating to avoid damaging the door or motor. It is recommended to choose weight accessories and renovation services provided by reputable manufacturers to ensure the safe and stable operation of the renovated rolling shutter door.

　　結語

　　Conclusion

　　濟南冬季門店卷簾門上凍問題，核心癥結在于溫差導致的水汽凝結結冰，而增加配重實現門體與地面密封，是針對性極強的解決方案。對于洗車店等水汽量大的門店來說，這一方法簡單實用、性價比高，能有效避免冬季因門體卡頓影響經營。希望這份科普能幫濟南的店主們解決實際煩惱，冬季也能順暢營業。如果還有其他關于卷簾門使用的疑問，歡迎在評論區留言交流！

　　The problem of freezing on the rolling shutter doors of winter stores in Jinan lies in the condensation and freezing of water vapor caused by temperature differences. Adding counterweights to achieve sealing between the door and the ground is a highly targeted solution. For stores with high moisture content such as car wash shops, this method is simple, practical, and cost-effective, which can effectively avoid the impact of door jamming on business during winter. I hope this popular science can help shop owners in Jinan solve practical problems and ensure smooth business operations in winter. If you have any other questions about the use of rolling shutter doors, please feel free to leave a message in the comment section for discussion!

　　本文由  濟南卷簾門 友情奉獻.更多有關的知識請點擊  http://www.kmmhwl.com/   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Jinan Rolling Shutter Doors For more related knowledge, please click http://www.kmmhwl.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.