目錄：

　　catalogue

　　1.防盜門、卷簾門快速破拆技術

　　1. Rapid dismantling technology for anti-theft doors and rolling shutter doors

　　2.機械鎖體防盜門破拆步驟

　　2. Steps for dismantling the mechanical lock body anti-theft door

　　3.常見防盜門基礎破拆技術

　　3. Common anti-theft door foundation dismantling techniques

　　一

　　one

　　防盜門破拆技術

　　Anti theft door breaking and dismantling technology

　　此方法適用于普通家用防盜門中的普通面板式和指紋面板式門鎖。所需器材：大力鉗、“一”字螺絲刀步：用大力鉗夾牢門鎖面板兩側，對其進行破拆，使其露出內部鎖芯。第二步：用大力鉗尾部“破拆頭”套牢鎖芯并將其折斷。第三步：用“一”字螺絲刀深入鎖芯孔洞撥動鎖芯撥片。第四步：用“一”字螺絲刀深入門把手處孔洞旋鈕即可完成開啟。備注：目前市面各類防盜門均適應此種方法。

　　This method is applicable to ordinary panel and fingerprint panel door locks in ordinary household anti-theft doors. Required equipment: pliers, "one" screwdriver. Step 1: Use pliers to clamp both sides of the door lock panel, and break and remove it to expose the internal lock core. Step 2: Use a pair of pliers to secure the lock cylinder and break it. Step 3: Use a "one" screwdriver to enter the lock cylinder hole and move the lock cylinder paddle. Step 4: Use a "one" screwdriver to enter the hole on the door handle and turn the knob to complete the opening. Note: Currently, all types of anti-theft doors on the market are suitable for this method.

　　二

　　two

　　卷簾門破拆技術

　　Rolling shutter door dismantling technology

　?。ㄒ唬┢胀ň砗熼T（窄條式）所需器材：手電鉆、破拆工具種方法：拆卸邊框螺絲。

　　（1） Equipment required for ordinary rolling shutter doors (narrow strip type): hand drill, dismantling tool. The first method is to remove the frame screws.

　　步：用標準17mm螺母（具體結合固定門板螺母尺寸選?。┦蛛娿@對卷簾門邊框的固定螺絲進行拆卸。

　　Step 1: Use a standard 17mm nut (selected based on the size of the fixed door panel nut) and a handheld drill to remove the fixing screws of the roller shutter door frame.

　　第二步：螺絲拆卸后直接用鐵挺、螺絲刀等工具撬動邊縫，使其與墻體整體分離，達到破拆效果，從而打開通道。第二種方法：利用無齒鋸破拆。所需器材：無齒鋸步：用無齒鋸對卷簾門進行縱向切割。第二步：抽拉卷簾門板條，即可完成快速破拆。（二）翻板卷簾門（固定點在屋內頂棚）所需器材：無齒鋸步：沿著翻板門拼接處用無齒鋸進行縱向切割。只需2次縱向直線切割即可開啟足夠大的通道。第二步：對切割部位進行推撞，使其掉落。經遼源支隊對市面常見防盜門和防盜卷簾門的調研和專項專項訓練，防盜門破拆時間一般在35秒內，窄條式防盜卷簾門整體拆除時間一般在50秒內、無齒鋸破拆抽條方式一般在1分鐘內，翻板式卷簾門無齒鋸破拆一般在40秒內。

　　Step 2: After disassembling the screws, use tools such as iron braces and screwdrivers to pry open the edge seams and separate them from the wall as a whole, achieving the effect of breaking and disassembling, thereby opening the passage. The second method is to use a toothless saw to break and dismantle. Equipment required: Toothless saw Step 1: Use a toothless saw to longitudinally cut the rolling shutter door. Step 2: Pull the roller shutter door slats to complete the rapid demolition. （2） Equipment required for the flip up rolling shutter door (fixed on the indoor ceiling): Toothless saw. Step 1: Cut longitudinally along the joint of the flip up door using a toothless saw. Only 2 longitudinal straight cuts are needed to open a sufficiently large channel. Step 2: Push and collide the cutting area to make it fall off. According to the research and specialized training conducted by the Liaoyuan Support Team on common anti-theft doors and anti-theft rolling shutter doors in the market, the dismantling time for anti-theft doors is generally within 35 seconds, the overall dismantling time for narrow strip anti-theft rolling shutter doors is generally within 50 seconds, the toothless saw dismantling method is generally within 1 minute, and the toothless saw dismantling method for flip type rolling shutter doors is generally within 40 seconds.

　　四平支隊防盜窗快速破拆技術規程

　　Technical regulations for rapid breaking and dismantling of anti-theft windows in Siping Detachment

　　一、防盜窗結構形式：選擇常見的實心圓柱鋼筋或不銹鋼管防盜窗。二、破拆器材選擇：冷切鋸或角磨機

　　1、 Anti theft window structure form: Choose common solid cylindrical steel bars or stainless steel tube anti-theft windows. 2、 Selection of demolition equipment: cold cutting saw or angle grinder

　　三、破拆方法：步驟1：一名救援人員攜帶冷切鋸或角磨機沿消防拉梯攀登所需破拆窗口處。步驟2：根據救援需要確定破拆的尺寸大小。步驟3：按照確定的尺寸，利用冷切鋸或角磨機切割防盜窗橫向、豎向鋼筋，打通救援通道。四、破拆時間：1分鐘                                                                                                                       已關注                                                                             關注                                                                 重播                                                        分享                                                                     贊                                                                                                                       關閉觀看更多更多退出全屏切換到豎屏全屏退出全屏應急救援技戰術已關注分享視頻，時長00:460/000:00/00:46 切換到橫屏模式 繼續播放進度條，百分之0播放00:00/00:4600:46倍速全屏 倍速播放中  0.5倍  0.75倍  1.0倍  1.5倍  2.0倍  流暢  您的瀏覽器不支持 video 標簽 繼續觀看 消防員防盜、卷簾門快速破拆開鎖技術（附教學片） 觀看更多轉載,消防員防盜、卷簾門快速破拆開鎖技術（附教學片）應急救援技戰術已關注分享點贊在看已同步到看一看寫下你的評論                                 視頻詳情

　　3、 Dismantling method: Step 1: A rescue worker carries a cold saw or angle grinder and climbs along the fire ladder to the required dismantling window. Step 2: Determine the size of the demolition according to the rescue needs. Step 3: Use a cold saw or angle grinder to cut the horizontal and vertical steel bars of the anti-theft window according to the determined size, and open up the rescue passage. 4、 Broken down time: 1 minute. Followed, followed, replayed, shared, liked, closed, watched more, exited full screen, switched to vertical screen, exited full screen, responded to emergency rescue techniques and tactics. Followed and shared video, duration 00:460/00:00/00:46. Switch to landscape mode and continue playing progress bar, 0% playback 00:00/00:4600:46 times full screen speed playback 0.5 times 0.75 times 1.0 times 1.5 times 2.0 times smooth Your browser does not support video tags Continue watching Firefighter anti-theft and rolling shutter door quick breaking and unlocking technology (with tutorial) Watch more reposts, Firefighter anti-theft and rolling shutter door quick breaking and unlocking technology (with tutorial) Emergency rescue techniques and tactics Follow, share, like, synchronized to watch, write your comment video details

　　四平支隊防盜門快速破拆技術規程

　　Technical regulations for rapid breaking and dismantling of anti-theft doors in Siping Detachment

　　一、防盜門結構形式：選擇常見的實體式防盜門，結構包括有內鎖舌、側鎖舌、天地鎖舌，并全部處于開啟狀態。二、破拆器材選擇：手動破拆工具、便攜式液壓擴張器

　　1、 Structure of anti-theft door: Choose a common solid anti-theft door, which includes internal locking tongue, side locking tongue, and sky and earth locking tongue, all of which are in the open state. 2、 Selection of demolition equipment: manual demolition tools, portable hydraulic expanders

　　三、破拆方法：步驟1：一名救援人員利用手動破拆工具組對防盜門橫向門鎖處的上部防撬邊進行開縫，打開擴張空間后，對防盜門采取限位措施。步驟2：另一名救援人員利用便攜式液壓擴張器強行擴張防盜門，直房門打開。四、高溫門控技術：防盜門破拆后，及時關閉，并采取高溫門控技術，防止轟然回燃。五、破拆時間：1分鐘

　　3、 Dismantling method: Step 1: A rescue worker uses a manual dismantling tool set to open the upper anti pry edge of the transverse door lock of the anti-theft door, and after opening the expansion space, takes limiting measures on the anti-theft door. Step 2: Another rescuer uses a portable hydraulic expander to forcefully expand the anti-theft door until the door opens. 4、 High temperature door control technology: After the anti-theft door is broken, it should be closed in a timely manner, and high-temperature door control technology should be adopted to prevent a loud rebound. 5、 Dismantling time: 1 minute

　　防盜門基本概況

　　Basic Overview of Anti theft Doors

　　機械鎖體防盜門破拆步驟

　　Mechanical lock body anti-theft door breaking and dismantling steps

　　視頻詳情

　　Video Details

　　步：準備強力破拆鉗和一字螺絲刀。

　　Step 1: Prepare strong pliers and a straight screwdriver.

　　第二步：使用強力破拆鉗嘴對門鎖外觀進行清理破拆，左右扭動，直卸下。

　　Step 2: Use a powerful pliers to clean and disassemble the appearance of the door lock, twist it left and right until it is removed.

　　第三步：使用套鎖嘴對鎖芯進行強力破拆并清理相關部件。

　　Step 3: Use a locking nozzle to forcefully disassemble the lock cylinder and clean the relevant components.

　　第四步：使用一字螺絲刀對鎖具進行撥動，使鎖牙回彈。

　　Step 4: Use a Phillips screwdriver to turn the lock and make the locking teeth rebound.

　　第五步：再次使用螺絲刀對保險裝置進行撥動。

　　Step 5: Use the screwdriver again to turn the safety device.

　　指紋鎖體防盜門破拆步驟

　　Steps for dismantling fingerprint lock body anti-theft door

　　一、破拆完面板后，使用老虎鉗對方桿進行回?fù)?，就可以將門打開。

　　1、 After dismantling the panel, use pliers to pull back the lever to open the door.

　　二、在復雜的情況下，用一字螺絲刀對下保險進行回?fù)?，往其開門位置回?fù)?，使其處于開啟位置。

　　2、 In complex situations, use a flathead screwdriver to retract the lower safety device and move it back to its open position to keep it in the open position.

　　三、再次使用螺絲刀對中間的保險裝置進行回?fù)?，使其處于?fù)位的位置。

　　3、 Use the screwdriver again to retract the middle safety device to its reset position.

　　四、使用老虎鉗對方桿進行轉動，門就可以開啟。

　　4、 Finally, use pliers to rotate the lever and the door can be opened.

　　五、當我們破拆時，方桿掉落后可以使用螺絲刀進行轉動，往門開啟的位置進行撥動。

　　5、 When we dismantle it, the square pole can be rotated with a screwdriver to move towards the open position of the door after it falls off.

　　破拆現場操作

　　On site demolition operation

　　注意事項：一、破拆時，穿戴好個人防護裝備，佩戴好護目鏡。二、必要時在水槍掩護下進行。三、人員交叉步站立、手握鎖嘴末端，利用杠桿原理進行有效撬動。四、針對不同類型鎖體，要根據其結構特點，注意鎖梯撥動位置、方向。

　　Attention: 1. When dismantling, wear personal safety protective equipment and goggles. 2、 If necessary, conduct under the cover of a water gun. 3、 Personnel stand cross legged, holding the end of the lock mouth, and use the principle of leverage to effectively pry it. 4、 For different types of lock bodies, attention should be paid to the position and direction of the lock ladder according to their structural characteristics.

　　常見防盜門基礎破拆技術

　　Common anti-theft door foundation dismantling techniques

　　防盜門破拆技術

　　Anti theft door breaking and dismantling technology

　　防盜門破拆技術是我們進入火災現場的步，這一步非常關鍵，直接影響著我們初期火災的處置效果。這里我們?yōu)榇蠹已菔镜膬煞N技術，分別是Hallgan破拆技術和精準破拆技術。這兩種破拆技術結合著用基本上可以破拆大部分的防盜門。

　　The anti-theft door breaking and dismantling technology is the first step for us to enter the fire scene, which is very crucial and directly affects the effectiveness of our initial fire disposal. The two technologies we are demonstrating here are Hallgan disassembly technology and precision disassembly technology. These two dismantling techniques combined can basically dismantle most anti-theft doors.

　　Hallgan基礎破拆技術1.到達起火房間門前，利用hallgan敲擊上、中、下，通過Hallgan手感反饋和觀察門動作來判斷鎖舌的位置以及鎖的類型，如果是天地鎖我們立刻采用精準破拆，單道鎖我們繼續采用hallgan破拆。2.清楚鎖舌的大概位置后，我們可以選擇在鎖舌上下10cm處開展hallgan破拆。經過市場調研我們大部分入戶門都是外開門，這里我們將hallgan鋤段賽入門縫，制造縫隙。3.找到位置后開始破拆，這要注意控制hallgan的班長要指揮板斧手開展破拆，前期班長要不斷觀察和感受hallgan的反饋，不斷調整hallgan鋤端的角度，使他更加深入門縫。4.不斷調整鋤段的角度是因?yàn)榉辣I門都有防撬邊，我們需要調整角度越過防撬邊深入到門縫中，當我們突破防撬邊以后，班長要指揮板斧手開始持續敲擊hallgan，直到深入鋤端的三分之二5.板斧手要及時撤出，以為就像圖中所示有受傷風險，班長在末端發力利用杠桿原理來起翹防盜門，由于這款破門為了重復訓練采用了高強度材料，一般的如何防盜門強度沒有這么高這里我們也可用圖二的方式擴大門縫達到開門的效果6.開門時我們要注意，要背對著門，“后蹬”開門，這樣我們可以保證。關于板斧手

　　Hallgan basic dismantling technique: 1. When reaching the door of the room on fire, use Hallgan to tap up, middle, and down. Use Hallgan tactile feedback and observe the door movement to determine the position of the lock tongue and the type of lock. If it is a sky and earth lock, we immediately use precise dismantling. For single track locks, we continue to use Hallgan dismantling. 2. After understanding the approximate position of the lock tongue, we can choose to carry out Hallgan dismantling at 10cm above and below the lock tongue. After market research, most of our entrance doors are external doors. Here, we will race the Hallgan hoe into the door gap to create a gap. 3. After finding the location, start dismantling. Pay attention to controlling the team leader of the Hallgan to command the hatchet operator to carry out the dismantling. In the early stage, the team leader should constantly observe and feel the feedback from the Hallgan, adjust the angle of the Hallgan hoe, and make it deeper into the door crack. 4. Continuously adjusting the angle of the hoe section is because anti-theft doors all have anti pry edges, and we need to adjust the angle beyond the anti pry edges and deep into the door gap. When we break through the anti pry edge, the team leader needs to command the board axe hand to continuously strike the hallgan until it reaches two-thirds of the hoe end. Open the door, so we can ensure our center of gravity. Regarding the Axe and Axe Hand

　　1.破拆側手握緊斧頭根處，另一只手握緊末端，可采用半跪姿，如圖所示，利用肘部和膝蓋形成支點，根據破拆班長的指揮開展破拆。板斧垂直地面進行敲擊，基本可以適用大部分狹小環境2.環境允許的情況下板斧手要避開整個門口，做好極端情況下的應急避險。

　　1. Hold the axe root tightly with one hand on the dismantling side, and grip the end tightly with the other hand. You can adopt a semi kneeling position, as shown in the picture, using your elbows and knees to form a fulcrum, and carry out the dismantling according to the command of the dismantling squad leader. The board axe can be used to strike vertically on the ground and is generally suitable for most narrow environments. 2. If the environment allows, the board axe operator should avoid the entire doorway and take emergency measures in extreme situations.

　　防盜門破拆技術防盜門破拆技術是我們進入火災現場的步，這一步非常關鍵，直接影響著我們初期火災的處置效果。Hallgan破拆技術和精準破拆技術結合使用基本上可以破拆大部分的入戶防盜門這期我們講解的是精準破拆技術。

　　The anti-theft door dismantling technology is the first step for us to enter the fire scene, which is very crucial and directly affects the effectiveness of our initial fire disposal. The combination of Hallgan dismantling technology and precision dismantling technology can basically dismantle most of the anti-theft doors in households. In this issue, we will explain precision dismantling technology.

　　精準破拆技術1.利用大力鉗破拆面板經過判斷，入戶防盜門是“天地鎖”，我們立即采用精準破拆技術，如圖我們?yōu)榱烁奖愕恼故鹃T鎖的相對位置采用了亞克力教具模擬防盜門，這里也可以使用hallgan等破拆器材開展對鎖面板的破拆。

　　Precise dismantling technology 1. Using a powerful pliers to dismantle the panel. After judgment, the anti-theft door entering the house is a "heaven and earth lock". We immediately adopted precise dismantling technology. As shown in the picture, we used acrylic teaching aids to simulate anti-theft doors for more convenient display of the relative position of the door lock. Here, we can also use dismantling equipment such as Hallgan to dismantle the lock panel.

　　面板中間的連接是兩根長螺絲釘，破拆相對容易。2.利用大力鉗破拆鎖芯拆掉面板以后，鎖芯會暴露在我們面前，我們可以使用大力鉗后面的拆鎖芯工具進鎖芯的拆卸，也可以使用鉗子將鎖芯拆掉，鎖芯與鎖體的連接很薄弱，我們可以輕易地將鎖芯卸下。3.利用鎖匠工具進行開鎖拆掉鎖芯后我們可以直接使用鎖匠工具，深入鎖體進行開鎖。

　　The connection in the middle of the panel is made up of two long screws, which are relatively easy to break and remove. 2. After removing the panel, the lock cylinder will be exposed in front of us. We can use the lock cylinder removal tool behind the pliers to remove the lock cylinder, or use pliers to remove the lock cylinder. The connection between the lock cylinder and the lock body is very weak, so we can easily remove the lock cylinder. 3. Use locksmith tools to unlock. After removing the lock cylinder, we can directly use locksmith tools to enter the lock body for unlocking.

　　關于開鎖

　　About unlocking

　　無論是密碼鎖還是指紋鎖，只是鎖的面板面板有所不同，其結構都是由三部分組成即“鎖體、鎖芯、面板”，我們步都需要將鎖的面板先拆下，讓鎖芯暴露出來，而后拆掉鎖芯在鎖體進行開鎖作業。

　　Whether it is a password lock or a fingerprint lock, the only difference is the panel of the lock, which is composed of three parts: the lock body, the lock core, and the panel. The first step is to remove the panel of the lock to expose the lock core, and then remove the lock core to unlock the lock body.

　　鎖體結構這是我們制作的教具，我們可以清晰的看到鎖體的作用模式，當我們破拆鎖芯會出現，鎖芯有一半留在鎖體內部的情況，這時候無法使用鎖匠工具，這里我們可以使用扁口螺絲刀來進行技術作業。

　　The lock body structure is the teaching tool we made, and we can clearly see the mode of action of the lock body. When we break and dismantle the lock core, there will be a situation where half of the lock core is left inside the lock body. At this time, locksmith tools cannot be used. Here, we can use a flat screwdriver for technical operations.

　　鎖體中主要是這兩個結構來控制鎖舌來實現鎖定與解鎖，我們就是通過扁口螺絲刀壓推這兩個構件來實現開鎖。

　　In the lock body, these two structures are mainly used to control the lock tongue to achieve locking and unlocking. We use a flat screwdriver to push these two components to achieve unlocking.

　　撥動構件將扁口螺絲刀與構件垂直，向上推動下層構件，解鎖了下層構件后我們橫向撥動上層構件實現解鎖的動作。

　　To move the component, first place the flat screwdriver perpendicular to the component and push the lower component upwards. After unlocking the lower component, we move the upper component horizontally to achieve the unlocking action.

　　這是市面上常見的幾款鎖體，他們的解鎖技術都是一樣的。實戰模擬災情設定

　　These are the most common lock bodies on the market, and their unlocking technology is the same. Practical simulation disaster setting

　　Scenario setting后巷北三庫房門由于鑰匙斷在鎖芯內，根據換門需求，對北三庫房門開展破拆。

　　Scenario setting: Due to the key being broken in the lock cylinder, the door of the North Third Warehouse in the back alley has been dismantled and broken according to the door replacement requirements.

　　判斷為天地鎖，選擇使用精準破拆技術。

　　Judging as a heaven and earth lock, choose to use precise dismantling technology.

　　使用大力鉗將面板破壞，露出鎖芯。

　　Use pliers to break the panel and expose the lock cylinder.

　　在破拆鎖芯保護的時候非常容易將鎖芯也破壞，容易將鎖芯的一半留在鎖體內，這時候我們可以使用短款的鎖匠工具或者使用一字螺絲刀

　　When dismantling the lock cylinder protection, it is very easy to damage the lock cylinder as well, and it is easy to leave half of the lock cylinder inside the lock body. At this time, we can use a short locksmith tool or a straight screwdriver

　　前期使用一字螺絲刀解鎖，由于鎖體銹蝕較重，改用短款鎖匠工具，成功解鎖。成功保住門體，后期開展鎖體更換 ^ v ^ 。

　　In the early stage, a flathead screwdriver was used to unlock the lock, but due to severe rusting of the lock body, a shorter locksmith tool was used and successfully unlocked. Finally, the door was successfully secured and the lock replacement will be carried out later.

　　防盜門的破拆我們要多種技術相結合的來運用，根據不同警情、不同門鎖結構來使用不同的破拆門技術，這樣才能迅速的完成破拆任務。

　　We need to use a combination of multiple techniques to break down anti-theft doors. Different door breaking techniques should be used according to different alarm situations and lock structures, in order to efficiently and quickly complete the breaking task.

　　本文由  濟南卷簾門 友情奉獻.更多有關的知識請點擊  http://www.kmmhwl.com/   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Jinan Rolling Shutter Doors For more related knowledge, please click http://www.kmmhwl.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.